12 Best Outdoor Chaise Lounges for Pools (October 2026)

A pool deck without a proper lounger is a deck you step around instead of settle onto. The best outdoor chaise lounges for pools do three things well: they hold their position when wind comes off the water, they keep their shape through a second and third summer of direct sun, and they dry fast enough that mildew never gets a foothold. I compared 12 models built for poolside use, weighing frame material, recline range, cushion depth, weight and how they behave once chlorine and sunscreen are part of the daily routine.

What actually matters most is rarely the thing advertised. Owners on r/pools talk about blow-over far more than they talk about style, and the real complaints in the review data are the same ones every year: a sling that gives out after two seasons, rust streaking from hardware joints, cushions that will not dry before storage, and chairs too light to sit where you put them. So I weighted weight and frame coating above cushion softness, and I kept the picks honest about what each one gives up.

This guide was last updated in September 2026. Every rating and review count below is copied straight from the current listing, and every specification comes from the manufacturer data rather than a description page.

Our Top 3 Pool Chaise Picks After Comparing 12 Models

These three cover the widest range of real pool-deck situations, from a light set you can carry alone to a heavy wicker build that stays exactly where you put it.

Comparing All 12 Poolside Chaise Lounges at a Glance

Frame material, capacity and storage format decide how a chaise handles a wet deck. This table puts all 12 side by side so you can narrow the field before reading the individual entries.

1. Crestlive Products Metal Pool Chaise Set of 2 – The Best Overall Pick for Most Pool Decks

I put the Crestlive pair at the top because it is the least fussy of everything I compared. Each chair assembles with about ten screws, and two people finished the pair in half an hour without a single missing piece. The curved, armless profile looks closer to a modern patio piece than a folding camp chair, which matters if the lounger stays out year-round.

The sling seat runs 43.3 inches long and 21.85 inches wide, and the backrest locks into five positions from upright to fully flat at 12.7 inches off the deck. That flat position is real, not a marketing claim, so it works for actual naps rather than just propped reading.

Frame Weight and Wind Behaviour

At 28 pounds per chair, this is not the heaviest build in the roundup, but it is a powder-coated steel tube frame with a 350 lb rating, and it sits low enough that wind has to catch real surface area to move it. Reviewers who use theirs on open decks report they stay put in ordinary breezes.

That said, light enough to carry alone means light enough for a serious gust to drag across wet concrete. On an exposed deck, treat the legs as the weak point rather than the frame.

Textilene Fabric and Chlorine Exposure

The fabric is UV-resistant, water- and oil-proof, and quick-dry, which is exactly the specification set you want next to a pool. It rinses off with a hose and does not hold water the way a thick foam cushion does.

The recurring complaint is that the mesh softens and stretches over a few seasons of full sun. Owners replacing a tired set usually add a thin pad for the first summer or two.

Assembly, Legs and the Backwards-Fitting Trap

Assembly is the strongest part of this package, and the slim armless frame keeps the profile clean from every angle. The one construction detail worth knowing before you start is that the legs can be installed reversed, which leaves the chair rocking and able to mark a deck surface.

Check that all four feet sit flat on the concrete before you walk away from the box. It takes ten seconds and prevents the most common complaint on this chair.

At 75.79 inches long and 24.61 inches wide, the pair needs a straight run of deck rather than a corner. If you are still sizing the space, the large above-ground pool guide has deck-planning notes that apply here too.

2. Devoko Rattan Folding Chaise Set of 3 – Best Value When You Want a Resort Look and a Side Table

This set solves a specific problem: a pool deck that needs somewhere to sit, somewhere to put a drink, and a way to clear the whole arrangement out of the rain in under a minute. The two chaises fold flat and the side table folds with them, which is rare in this category.

Visually it reads as resort wicker rather than a folding metal chair, and the cushions tie off onto the frame so they stay put when you shift position. The adjustable back with lumbar support is a real adjustment rather than a fixed prop.

Rattan Finish Over a Steel Frame

The material is listed as steel and rattan, with a steel tube frame carrying a black rattan finish. It looks closer to woven resin than natural wicker at arm’s length, and the tied cushions soften the hard edges that make bare frames uncomfortable.

The long-horizon weakness owners report is surface rust appearing at the joints after a season or two of open-air exposure. That is normal for a coated steel frame that stays wet, and it is the reason to rinse and dry before covering.

Weight and Who Can Move It

At 53.7 pounds for the set, this is a two-person carry. For a fixed poolside arrangement that is an advantage, since the extra mass works against wind.

The low seat height is harder to rise from, and reviewers with older backs flag it directly. Anyone who struggles with low seating may find the taller options later in this list easier to use.

Storage and the Included Table

No assembly is required, and the folding design means the whole set can move to a garage or covered lanai when the season turns. Cushions attach with ties and slip over the top of the chair, so they come off for washing without tools.

The side table is genuinely useful but the least-built component in the package. Owners describe it as somewhat wobbly, and some units have a middle cross bar or leg that does not reach the ground fully when opened, so check the frame for square before the first guest arrives.

If your deck is soft or uneven rather than flat concrete, that flush-foot issue matters more than it would on a paved patio.

3. WAROOM Resin Wicker Chaise Set of 2 – Premium Pick for Thick Cushions and a Side Shelf

This is the cushioned deck-side chair that held up best under long sessions in my comparison, and the reason is cushion specification rather than styling. The foam is 2.3 inches of high-resilience sponge under breathable polyester covers, which clears the 2 to 3 inch benchmark buyers in this category treat as the minimum for a long afternoon.

At 83 pounds per chair it is also the heaviest. Owners treat it as a permanent placement and report that the extra mass means it does not move around on a wet deck, which is exactly the behaviour you want on an open poolside.

Resin Wicker on a Rust-Resistant Steel Frame

The construction is all-weather resin wicker over a powder-coated steel frame, a combination that handles salt air and splashed chlorine better than painted wood or bare aluminium. The weave stays colour-consistent through seasons where fabric-covered frames start to look tired.

Seat height is 16 inches with a 46 inch seat depth, which is taller and deeper than most pool loungers and more comfortable for reading. The trade is bulk: 78 inches deep and 25.6 inches wide per chair is a serious footprint.

Side Shelf and Foldable Tabletop

The side shelf and foldable tabletop mount on either side, so two chairs side by side can share a surface or each keep their own. It is the most useful storage detail on any chair here and it holds books and drinks without a separate table taking up deck space.

For pool setups on a tight budget, our inflatable pool buying guide covers deck layouts where every square foot counts.

Cushion Care and the Included Cover

A furniture cover is included in the box, which is unusual at this level and answers the biggest long-term question: what happens between seasons. Covers are the single best defence against both UV fade and mildew in cushions.

Assembly and Moving the Pair

Assembly is required, but the package includes tools, hardware and instructions. Plan for a second person for each chair, since the weight makes a solo lift awkward rather than dangerous.

Weight capacity is rated at 300 lb, lower than several resin and aluminium models in this roundup. If you are shopping for a heavier user, the extended-length HDPE option later in this guide is a better fit.

4. MUPATER 4-Fold Portable Sun Lounger – Best for Beaches, Cabins and Anyone Who Carries Their Own Chair

At 14.6 pounds, this is the chair you can carry from the car to the pool edge without thinking about it, and it folds to 6.3 inches deep, so it disappears into a closet between summers. For beach houses, camping trips and vacation rentals that is a different product category entirely.

The 4-level reinforced back uses thicker metal tubes and solid plastic fasteners rather than the thin spring latches used on cheap camp cots. It lays flat at 74 by 23.6 inches and rises to a 33.9 inch sit-up height.

Why the Weight Matters More Than the Price

Being this light is a genuine benefit and a genuine problem. On a pool deck in an exposed location, 14.6 pounds is exactly the range where furniture slides or tips, and on a wet surface it moves easily.

If your deck is open to wind, pair this chair with a strap or a non-slip mat rather than expecting weight to do the work.

Sun Aging of the Mesh and Cords

The breathable mesh is comfortable and dries quickly, but owners consistently report that the mesh elastic and the bungee ties deteriorate after a season or two of direct sun. That is a fair trade for a chair this portable, though it sets a realistic service life for the sling.

The frame is described as coated steel, and reviewers report rust developing over time with runoff that has stained a deck. Rinse it down and dry it rather than leaving it wet overnight.

Extras That Actually Get Used

The detachable side pocket keeps a phone, keys and a paperback out of wet sand, and the removable, adjustable pillow is a small thing that turns a flat sling into somewhere you can actually rest your head. Anti-slip feet are fitted to all legs.

One practical note: the back-leg locking can be hard to keep engaged, and the low profile makes it harder to rise from than a full-height chaise. The 265 lb weight capacity sits at the lower end of the framed models here.

5. DoCred 5-Position Folding Lounge Chair – Best for Higher Weight Capacity and Compact Storage

The reason to look at this chair is the 440 pound capacity on an aluminium and iron frame, which is higher than any other rating in this roundup. At 22 pounds it still folds down, and at 30.7 by 26.8 by 9.8 inches it fits in a closet corner or a garage shelf.

It works for more than a pool deck. Owners use it as a beach chair, a camping cot and an indoor nap cot, which is why the platform is wider than a typical chaise.

Frame Build and Capacity

Aluminium and iron tubes give a stiffer frame than the thin steel used on entry-level folding chairs, and the extra rigidity is what supports the 440 lb rating. The unfolded footprint is 75.2 by 26.8 inches, a full 6 inches wider than most.

The trade is weight. This is a solid folding chair, not a packable one, and the difference shows when you try to fit it in a small car.

Comfort Without a Pad

A soft pad and a detachable pillow are included, and they matter more than they would on a cushioned wicker chair because the underlying surface is unpadded fabric. This chair is comfortable with the pad and noticeably less so without it.

At a 4.1 average with a relatively high share of one-star reviews, comfort of the bare surface and the quality of the supplied pad are the two most common themes in the feedback.

The Adjustment Mechanism

The five-position locking system changes the angle of the backrest, but reviewers note the positions are not evenly spaced, so the first and second notches sit closer together than you might expect from the spacing on paper.

That is a small irritation rather than a defect, and it becomes obvious the first time you try to settle into a mid-angle position. If precise back support matters to you, the Crestlive set at the top of this guide has a cleaner five-notch progression.

6. ABORON 5-Position Textilene Tanning Chair – Best for Long, Tall Sunbathing

This is the one to buy if you are tall. The manufacturer rates it for users up to six foot two, and the 75.2 inch length gives you room to actually lie out rather than perch diagonally on a chair built for a smaller frame.

It is also the lightest framed lounger in the roundup at 11.4 pounds, folds to 26.8 by 30.7 inches, and the Textilene surface dries quickly after you come out of the pool.

Capacity and the Specification Mismatch

The frame is listed with a 500 pound capacity while the specification listing shows 400 pounds. If your weight is anywhere near the upper end of that range, treat the lower figure as the honest one and buy accordingly.

Alloy steel round tube is a good frame material for a chair this light, and the joint construction is what separates it from the folding cots that sit in the same price band.

The Cushion Is the Weak Point

Reviewers like the chair and are unimpressed with the included cotton pad, describing it as thinner and cheaper-feeling than the listing images suggest. Some also report a colour mismatch between what was ordered and what arrived.

Plan on replacing the pad with a standard 27-inch chaise cushion, which fits the 26.8 inch width cleanly and fixes the comfort issue for a fraction of the chair’s cost.

Head Support and Getting Up

Two structural limits are worth knowing. The backrest does not rise high enough to support the head for every user, and the seat sits very low to the ground, which makes standing up harder for anyone with limited hip mobility.

Raw frame edges are also reported as jagged enough to scratch legs. A quick pass with a file or cloth tape after assembly is a cheap precaution.

If low seat height rules it out for you, the two cushioned picks in this roundup sit noticeably higher off the deck.

7. SERWALL HDPE Lounge Set of 2 with Cup Holder – Best for Salt Air, Sun and Storms

High-density polyethylene removes the two failure modes that kill metal pool furniture: rust and UV brittleness. There is no coating to chip, no screw joint to streak, and nothing to corrode in salt air, which is why this is the pick for a coastal property or a storm-exposed deck.

The built-in rolling wheels are the feature owners mention most. They let you chase the sun across the deck or pull the pair away for storage without needing a second person, which solves the usual complaint that resin furniture is too heavy to move.

Why Plastic Wins in Coastal Climates

Forums keep asking which material survives salt air best, and the answer is the one with no metal in the load path. HDPE is described as holding up to sun, rain, salt air and high wind without surface degradation.

The wood-grain moulded finish also passes the aesthetic test, reading as teak to guests who do not touch it. It will not weather to the silver-grey patina of real teak, but it will not crack either.

Wheels, Cup Holder and the Ergonomic Catch

The cup holder is moulded into the arm rather than glued on, and owners consistently find it solid enough for a full bottle or can. The armrests sit about four inches below the elbow, though, which leaves the arm unsupported during long sessions.

Combined with a very low seat, that makes this the least comfortable chair for older or larger users. Buyers who want plastic but need more height should look at the next entry.

Maintenance and the Cushion Problem

There is nothing to maintain. No cushions, no fabric, no oiling, just hose it off. That is the single strongest argument for plastic in a pool setting.

The trade is custom sizing. At 78.3 by 25.1 inches, off-the-shelf replacement cushions are hard to find, so plan on using a strap-on pad rather than a fitted cushion.

Partial assembly is required, and owners put it at 30 to 40 minutes per chair for one person, so set aside an afternoon.

8. Ciokea HDPE Chaise Set of 2 with Wheels – Best for Taller Users Who Want Plastic

This is the plastic answer for people who found every other HDPE option too cramped. The extended 77.8 inch length, 450 pound capacity and 17.7 inch arm height are the three numbers that separate it from the rest of the plastic category.

It carries a 4.5 average, which is the second-highest rating among the twelve, and owners single out the armrests and the wheel mobility as the reasons. The two-year coverage is also longer than the one year offered on some resin rivals.

Length and Capacity

At 77.8 inches long and rated to 450 pounds, it accommodates users who find a standard 74-inch plastic chaise cramped. The trade is width: the seat is 20.5 inches, which suits slimmer users and is the most common surprise in the reviews.

Measure your build against that number before ordering, because no amount of good ergonomics compensates for a seat that is too narrow.

Wheels That Resist Wind

Owners specifically describe the wheels as heavy enough not to blow away while still being movable by one person, which is the balance most rolling loungers get wrong. The wheels are built in rather than retrofitted, so there is no bracket to loosen or bend.

For larger decks, a variable-speed pool pump setup is a separate decision, but the same deck-planning logic applies to furniture placement.

Heat and Comfort in Direct Sun

Bare plastic gets very hot in direct sun, and owners in warmer climates consistently add a cushion. There is no fabric in this design, which is what makes it maintenance-free, and it is also what makes midday use uncomfortable without something strapped on.

Assembly Time

Setup is quoted at roughly twenty minutes, but owners report closer to an hour per chair if the hardware is not sorted into piles first. Budget an afternoon for the pair.

The construction is HDPE and polypropylene, so nothing here corrodes, bleaches or harbours mildew. If you live somewhere with harsh sun and want furniture you can hose off and forget, this is the most well-rounded version of that idea here.

9. Kozyard Adjustable Reclining Lounge Chair – Best for Reading and Upright Lounging

Every other chair here is built to lie flat. This one is built to sit up, and if your idea of poolside time involves a book, a drink and conversation rather than napping, that is a feature rather than a compromise.

The recline operates by pushing back against the armrests, a simple mechanical action with no levers or catches to fail. The 19.9 inch seat height is the highest of the cushioned models in the roundup, and owners with older backs specifically call that out as the reason this one is easy to get out of.

Build Quality Reported Over Time

The extendable all-weather metal frame carries a powder-coated finish, and owners report five or more years of use with no frame wear or rust. That is the longest-horizon durability claim in this group, and it matters more than first-summer comfort in a category where people keep furniture for a decade.

It is also a heavy chair at 51.5 pounds, which is why reviewers describe it as a permanent piece that stays where it is put. The extra mass works in your favour on an open deck.

Cushions, Seat Depth and Lumbar Support

The plush padded cushions give a deep, comfortable seat with a 25.2 inch seat depth on a 60 inch frame. The depth is comfortable for lounging and slightly awkward for upright use, since you sit well back from the front edge.

Limited lumbar support where the two cushions meet is the most common comfort note. A small lumbar pillow fixes it in seconds.

The Recline Range, Honestly

There is one intermediate position, and that is all. It does not lay flat, so it is not the right chair for full-sun tanning or napping, and anyone who wants both should look at one of the five-position models instead.

Moving and Assembling

At 51.5 pounds this is a two-person carry and a two-person assembly. Tools and instructions are included, and the armrest-operated mechanism means there is nothing to lose during the build.

The back pillow velcro straps are awkwardly placed and hard to reach, which is annoying when you want to remove the cushion to wash the cover. Maximum weight recommendation is 300 pounds.

Tools and instructions come in the box, which saves a trip to the hardware store on a chair this size.

10. EUNHOO Polypropylene Chaise Set of 4 – Best for Large Decks and Pool Houses

Four chairs in a single box is the arithmetic that sells this set, and it is the fastest way to seat a big deck, a rental property or a pool house with a full lounging set. Each chair is 20.5 pounds, rated to 450 pounds, and adjusts through five locking positions.

The built-in locking mechanism is what makes it more than a cheap set. Owners drop the backs all the way down to turn the chairs into bench seating for kids, and the slats accept standard outdoor cushions strapped on securely.

Material and Cutout Ventilation

Water-repellent, quick-dry polypropylene with a cutout slat design is a sensible engineering choice. The cutouts let heat escape in hot weather instead of trapping it, and the polymer will not rust, rot or blister in sun the way painted wood eventually does.

It is a lighter-duty build than a premium resin lounger, and owners who expected heavy-duty weight from a four-piece set were let down. Treat it as furniture that moves around rather than a permanent fixture.

Assembly and Winter Storage

Snap-together assembly takes a few minutes per chair for one person, which is a genuine advantage when you are setting up four of them. The chairs also disassemble for compact winter storage instead of needing to be carried whole.

Warranty coverage here is one year, on the lighter side, but for furniture you intend to keep outdoors seasonally, it is at least stated clearly.

Comfort and Appearance Trade-offs

Hard plastic is uncomfortable to sit on without a cushion, and the slat design is what makes strapping one on straightforward. Expect to buy a set of standard cushions for regular use.

Owners also report finish blemishes and slight flex straight out of the box, plus a note that the black colour can fade with prolonged direct sun exposure. Dark resin absorbs heat, so this is a two-factor consideration in hot climates.

The one-year warranty and light-duty feel make this the right choice for seasonal and high-turnover use rather than a permanent deck installation.

11. Ciokea Folding Aluminum Chaise with Textilene – Best Rated and Best for Rust-Free Set-Up

This is the chair I recommend to anyone who wants zero assembly and zero rust. Open the box and it is ready to use, and the aluminium frame is the one material in this roundup that cannot develop a rust streak no matter how long it sits in salt air or splashed chlorine.

It also carries the highest average rating of the twelve at 4.6, with roughly 79 percent five-star reviews, and that consistency comes from how little there is to go wrong. The 17 pound weight and folding frame make it easy to carry between a pool, a beach and a storage space.

Aluminium as a Frame Material

Aluminium will not rust, and it does not need a coating to stay that way. For a coastal deck or a humid climate, that removes an entire category of maintenance and one of the most common complaints in this category.

The frame is rated to 150 kg, about 330 pounds, and the five backrest levels adjust smoothly and quietly, which is not always true of the spring latches on lighter folding chairs.

Comfort on a Firm Sling

The Textilene upholstery is breathable and quick-drying, so it handles pool use and humidity better than foam. It is also firm, and owners note it is best used with an added pad for long sessions.

Two included stability accessories are supplied for heavier users, but they must be fitted separately. Confirm they are in the box before you rely on them.

Low Seat Height

At about 12 inches off the ground, this is one of the lower profiles in the roundup. It is comfortable for reclining and less comfortable for getting in and out, particularly for anyone with reduced hip mobility.

It folds to a compact footprint, measuring 72.23 by 22.63 by 12.2 inches, which is one of the reasons it works for small patios, balconies and rooftops as well as a full pool deck.

No assembly, no rust and a 4.6 rating make this the cleanest recommendation in the guide if your priority is a chair that will still work in year five.

12. Kozyard Maya Cushioned Outdoor Chaise – Best for Thick Cushion Comfort

The cushion is the reason to buy this chair. At approximately 3.14 inches of high-elasticity foam across the full length, it is thicker than anything else in this roundup, and the water-repellent cover is fully removable and washable rather than a fixed skin you cannot clean.

Seat height of 12.56 inches is a little higher than the folding loungers, and the frame adjusts in length from 64 to 73 inches, so you can shorten it on a small deck and extend it for a full-length nap.

Cushion Depth and Cover Care

A washable, removable cover is the feature that decides whether cushions survive. Owners pull the cover off, machine-wash it and put it back, which is the only reliable way to stop pool sunscreen and body oil from permanently staining foam.

The fixed straps that hold the cushion in place are also what stop it shifting as you reposition, and a wide 26.3 inch seat means two adults can share without elbowing each other off.

Frame and Seasonal Behaviour

The powder-coated steel frame has resisted weather over multiple seasons in owner reports, and the multi-position backrest adjusts smoothly through its range. Maximum weight is 250 pounds, which is worth checking against your build.

Fresh cushions arrive stiff and typically soften after some sun exposure, so do not judge the comfort in the first ten minutes.

Small Quality Details

All hardware, tools and step-by-step instructions are included, which matters more than it sounds on a chair with a full-length cushion to thread. Assembly is easier with two people.

Two cosmetic issues recur: the back cushion can arrive dented, and the colour renders more terracotta or orange than the listed red. A bent frame hole has also been reported, so check the hardware before you build.

If you want the deepest cushion in the guide and do not mind a fabric cover that needs occasional washing, this is the one.

How to Choose an Outdoor Chaise Lounge for a Pool

The right chaise is decided by two things most shopping lists miss: how much wind your deck gets, and whether you will leave the furniture out through winter. Get those two answers right and the material choice makes itself.

What Is the Best Material for an Outdoor Chaise Lounge?

For most pool decks, powder-coated steel or resin wicker over steel offers the best balance of strength, weight and appearance. Powder-coated aluminium is the most corrosion-resistant option and never rusts, while HDPE or polypropylene is the only realistic answer to salt air and hurricane-prone coasts. Solid teak and acacia last longest but demand annual oiling.

No material wins everywhere, and the trade-off you are really choosing is maintenance against mass. Light materials are pleasant to move and prone to blowing over; heavy materials stay put and refuse to be repositioned alone.

Wind Resistance and Blow-Over Prevention

The most-cited problem in pool-owner forums is furniture being blown or slid across a wet deck, sometimes into the water. It is a weight and placement problem before it is a product problem, so the six fixes below matter more than the brand name on the frame.

• Buy for weight, not just for looks. Anything above 40 pounds per chair resists ordinary breezes. The lightweight folding loungers in this roundup need help on an exposed deck.
• Place them out of the wind funnel. Decks cornered between two walls channel airflow, and the worst position is a chaise sitting in that gap.
• Use a non-slip mat or strap. A rubber pad under each leg stops the sliding that a bare frame cannot prevent.
• Do not rely on cushions as ballast. Fabric blows off and collects water rather than anchoring the frame.
• Take chairs in before a named storm. Foldables go inside in a minute; a permanent piece should sit in a sheltered corner.
• Check the hardware each spring. Loose joints are what turn a gust into a tip-over.

For deeper water planning, our guide to pool goggles that stay clear covers the other half of a season at the water.

Cushions, Fabric and UV Resistance

Look for 2 to 3 inches of foam as the minimum for a lounger you will use for hours, and treat anything thinner as a seasonal chair. The more important specification is UV stabilisation, because fabric that has gone brittle after one summer is the fastest way to end up buying twice.

Removable, washable covers matter more than most buyers expect. Sunscreen and body oil permanently stain foam, and a cushion you cannot remove is a cushion you will eventually replace. Quick-dry foam and open-weave Textilene are both good answers to humidity.

For mould, the rule is simple and non-negotiable: never store a damp cushion. Rinse, stand it somewhere with airflow, and only cover it once it is dry.

In-Pool Loungers vs Deck-Side Chaises

None of the twelve picks in this guide is a true in-pool lounger. In-pool models are water-filled platforms with built-in ballast and a submerged canopy that keeps you shaded while you float; they need a wide shallow shelf and are a different purchase entirely.

Deck-side chaises sit at the pool edge, are cheaper, easier to move and much more comfortable for reading, since you are not fighting buoyancy. For most homeowners, a deck-side chaise is the better buy and an in-pool lounger is a second purchase for a shallow beach-entry pool.

Sizing, Deck Clearance and Layout

Allow a clear walkway of at least three feet around a pool and keep the chaise row out of that path. Single chaises are typically 20 to 28 inches wide, and the sets in this roundup run 75 to 78 inches long, so measure the run before choosing a two-piece set.

Rear wheels matter more on a paver or concrete deck than on wood, and they let you chase the sun without dragging furniture across the surface. Check that the chair folds or lifts over the pool edge if you plan to store it out of season.

Care, Covers and Off-Season Storage

Hose furniture down regularly, scrub fabric with mild soap, and let it dry fully in open air before covering. A cover traps moisture against a surface that has not dried, and that is how mold starts.

Foldables go into a garage or storage box. Fixed resin and wicker sets can stay under a fitted cover, ideally with the cushions removed and stored separately. Re-check every fastener in spring, especially on powder-coated steel, where a joint that worked last summer can loosen by the first warm week.

If you are matching this purchase to a broader backyard setup, our outdoor soundbar guide covers the same deck-planning logic for audio.

Frequently Asked Questions

Which Pool Chaise Lounge Should You Buy in 2026?

Pick the Crestlive metal set if you want the least fuss and the strongest review history in the group. Choose the Ciokea aluminium chair if rust is your biggest fear or you refuse to assemble anything, and take the SERWALL HDPE set if you live somewhere with salt air, storms and no interest in maintaining fabric.

Go heavier on comfort with the WAROOM resin wicker pair or the Kozyard Maya if you lounge for hours, and go bigger with the EUNHOO set of four if you are seating a whole pool house. For a beach house, a rental or a balcony, the MUPATER or Ciokea folding loungers carry anywhere and store in a closet.

Whichever one you settle on, measure the deck first, buy for weight if your deck is exposed, and plan to rinse and dry it before every cover. The best outdoor chaise lounges for pools are the ones still in good shape when you compare them again next summer.